D&D Plastering
Services · 02

Stone Masonry

Stone wants to be set by hand. We sort each pallet on arrival and reject the boring pieces. Joints are tooled to a consistent depth. No shiners.

TradeStone Masonry / SM
Scopes6
Specialties2
Working since2001
SM-00

What we do

A complete scope.

  • 01Natural stone veneer
  • 02Manufactured stone
  • 03Ledger and dry-stack
  • 04Hearths & fireplaces
  • 05Boulder & rubble walls
  • 06Stone repair and re-pointing
Cure schedule6 to 9 days, weather permitting
01Lath1 d
02Scratch48 h
03Set stone2 to 4 d
04Grout, seal24 h

Finishes

The sample board.

What stone masonry actually looks and behaves like, finish by finish, with the specs we quote against.

Dry-stack ledgestone

01
BackingLath over WRB
SettingScratch coat, then setting bed
JointNone, tight fit
UseColumns, wainscot, chimney chases

Mortared fieldstone

02
BackingLath over WRB
SettingFull mortar bed
JointRaked or flush, tooled
UseSite walls, entry piers

Manufactured veneer

03
BackingLath over WRB
SettingScratch coat, then setting bed
JointGrouted and struck
UseLarge elevations on a budget

Cut limestone

04
BackingLath over WRB
SettingMortar bed, shimmed to line
JointTooled, consistent width
UseSills, caps, door surrounds

Assembly

What is behind the finish.

Nearly every failure starts in a layer nobody sees once the wall is done. This is the order we build it in.

01 Stud16 in o.c.02 Sheathing03 Weather barrierTwo layers04 Self-furring lath05 Scratch coat1/2 in06 Setting bed1/2 in07 StoneBack-butteredASSEMBLY
Adhered stone veneer over a scratch coat and setting bed. Section, not to scale.
SM-DET
Why it matters

Stone is a sculpture problem, not a coverage problem. We start with the corners and work inward. The wall reads as one composition because someone composed it.